How To Setup | And Use A Laser Cutter With Rd Works

Setting up and using a laser cutter with RDWorks involves a few key stages: installation, physical connection, and preparing your design for cutting or engraving. 1. Installation & Setup

For a more stable connection over long distances, you can configure a static IP address on both your PC and the machine. How to setup and use a laser cutter with RD Works

Before connecting your hardware, you must install the software and its drivers correctly. Setting up and using a laser cutter with

In RDWorks, go to the bottom right settings panel and click "Test." If it says "Port test success," you are ready. 3. Basic Operations in RDWorks Before connecting your hardware, you must install the

In the setup window, select your language and preferred unit of measurement (mm or inches). 2. Connecting the Machine

You can connect your computer to the laser cutter via USB or Ethernet.