: Plug the Ethernet cable from your ISP (or modem) into the Internet/WAN port (usually colored differently, like yellow or blue).

To configure the router, you must access its internal web-based utility.

: Set a password (PSK) of at least 8 characters . Use WPA2-PSK encryption for the best security. Essential Default Settings at a Glance DIR-615 - D-Link FTP

1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC. 2. D-Link FTP DIR-615 - D-Link FTP

: admin (or leave blank depending on the hardware revision)

: Connect your PC to any of the four LAN ports using the provided Ethernet cable. While you can set it up via Wi-Fi, a wired connection is more reliable for initial configuration.

: In the address bar, type the default IP: 192.168.0.1 . Default Credentials : Username : admin