Shema Jelektrochajnika Termosa May 2026

Pressing the "Pour" button activates the electric motor pump, which pulls water from the bottom of the internal flask and pushes it through the spout. 3. Comparison with a Standard Kettle Standard Electric Kettle Thermopot (Kettle-Thermos) Power 1500–3000W 700–900W (boil) / 30-50W (warm) Capacity 1–2 Liters 3–5 Liters Insulation Minimal (single wall) High (double-walled with insulation) Dispensing Manual pouring Electric or mechanical pump Tips for Maintenance and Repair

When turned on, electricity flows through the thermal fuse and the closed contacts of the main thermostat to the primary high-power TÉN.

Most thermopots use two separate heating elements or a single element with two circuits: Main Element ( EK1cap E cap K 1 ): High power (700–900W) for the initial boiling phase. Keep-Warm Element ( EK2cap E cap K 2 shema jelektrochajnika termosa

Once boiling, the main thermostat opens its contacts. The circuit then redirects power through the secondary "Keep-Warm" TÉN or a control relay.

) that permanently breaks the circuit if the thermostats fail and the pot overheats dry. Pressing the "Pour" button activates the electric motor

Scale buildup on the sensors can cause the thermopot to switch off too early or fail to maintain the correct temperature.

Never submerge the base or the main body in water, as this will damage the internal circuit boards. Most thermopots use two separate heating elements or

Below is a breakdown of the typical electrical scheme and how these components function together. 1. Key Components of the Electrical Scheme