Every Woodworker Should Know: Tips And Tricks

Always measure twice, but also mark your waste side with a clear 'X' so you don't accidentally cut on the wrong side of the line. 2. Keep It Sharp A dull tool is a dangerous tool.

Never apply glue until you have fully assembled the project with clamps to ensure every joint closes tightly. Tips and Tricks Every Woodworker Should Know

Instead of a pencil, use a knife for critical cuts. It creates a physical "track" for your saw or chisel to follow, ensuring a perfect fit. Always measure twice, but also mark your waste

Use a scrap piece of MDF or plywood as a sub-fence on your miter saw to prevent "tear-out" (splintering) on the back of your boards. Never apply glue until you have fully assembled

Instead of using a tape measure for repetitive lengths, mark the dimensions on a scrap piece of wood (a "story stick"). This eliminates "cumulative error" from slightly different tape readings.

Use a drinking straw to scoop up wet glue squeeze-out in tight interior corners. 4. Machine Safety & Setup